Ionised Smoke Alarm With Escape Light
Dual Ionisation chamber sensor
Built in test button, checks circuitry, sensor and sounds horn
Built in emergency light, illuminates when in alarm state
Low power cell warning
Alarm powered by a 9V battery, light powered by 9V Alkaline battery
Alarm beeps every 40 seconds to indicate battery replacement required
Temperature Range: +4°C → +40°C
Dimensions: 140x125x46mm
Automatic Re-set and Self Test facilities
Sound Output: 85dB (A) at 3m
Corrosion resistant electrodes
Insect resistant cover
Note
Low battery warning signal, bleeps every minute for 30 days - when replacement batteries are required
Standards
BS EN14604:2005, CE Marked, Grade F systems as defined in BS5839: Pt.6:2004
Note
Low battery warning signal, bleeps every minute for 30 days - when replacement batteries are required
Stand Alone Fire Alarms
Battery Operated
A comprehensive range of battery operated smoke alarms all carrying the BS Kitemark and compliance with BS5446:Pt1:1990. They are suitable for BS5839:Pt6:1995 Fire Systems grade F.
Mains Powered Interconnectable
All new properties are required by the Building Regulations to have installed mains powered smoke alarms. Refurbished properties and small commercial premises may also be required to install mains operated alarms.
BS5839:Pt.6:1995 acknowledges that all three types of detection i.e. ionisation, optical and heat detection, need to be considered depending on the installation circumstances. It is also recommended that some form of back-up is used in the event of mains failure.
Optical alarms are recommended for use in circulation spaces such as landings and hallways. Ionisation alarms are more appropriate for use in living rooms and fixed temperature heat alarms are designed for use in kitchens and garages. All alarms must be interconnected using 3 core and earth cable.
At least one alarm on each floor of the house
Max. 7.5m between alarms and no more than 3m from bedroom doors
Alarms ca...
