USB AC/DC Millivolt/Current/Power Datalogger with Current Clamp Input
When used with a current clamp, this standalone data logger measures and stores up to 127232 a.c. and d.c. current
readings over a 0 to 1000 Amp d.c. measurement range (0 to 723 amps for a.c.). In "energy monitoring" mode, this data
is converted into power, energy (using a user defined voltage value) and cost (using a user supplied energy unit cost).
The millivolt measurement mode allows for direct measurement of voltage, up to 1V dc (700mV ac).
The user can easily set up the logger and view downloaded data by plugging the data logger into a PCs USB port and
using the downloaded software. The software has provision for a clamp scaling factor (the clamp input-output ratio of amps
to millivolts). Stored data can then be graphed, printed and exported to other applications.
The integral high contrast LCD display can show a variety of current, power, energy and cost information. At the touch of a button, the user can cycle between the most recent, maximum and minimum measurement values. The data logger is fitted with 2 replaceable AA batteries, which can allow logging for up to 6 months.
Compatible with a.c. and d.c. current clamps
Energy monitoring mode (to calculate power, cumulative energy and cumulative cost)
ac and dc millivolt measurement mode
Logging rates between 1s and 12hr
Stores 127,232 readings
4mm banana plug inputs (19mm spacing)
USB interface for set-up and data download
User-programmable alarm thresholds
High contrast LCD, with 4 digit current, power, cumulative energy and cumulative cost display functions, battery status alarm indicators and measurement units
Immediate, delayed and push-to-start logging
Supplied with user replaceable AA batteries x 2
Software available via Digital Download from a link supplied on a card within the Data Logger's packaging
Current Clamp Compatibility
Max Current
AC or ...
