Backplane Connectors

New items

HM2R30PA5100N9LF, Amphenol FCI

CONN RECEPT 55POS TYPE C R/A

New items

516-056-000-401, EDAC

Rack and Panel Receptacle Connector Housing, with Guide Pin From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding connector. Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately. EDAC 516 Range This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility. Guaranteed secure connection Hermaphroditic metal to metal contact design Polarized mouldings and metal locators Crimp, solder or wire wrap contacts Contacts fit plug and socket Current rating 8.5A max. Contact resistance 6mΩ max. Contact material Phosphor bronze Contact plating Gold, 0.25-0.5μm over nickel Insulator material Polycarbonate Dielectric withstanding voltage 1800V r.m.s. at sea level Withdrawal force 0.56N to 4.45N per contact pair Operating temperature -65°C to +125°C

Product Detail

New items

LX40-20P, Hirose

Plugs Ultra low profile Interface connectors with 2.0 mm mounting height Insulator and cover black Synthetic resin Low profile on the PCB Strong construction High contact reliability Sequenced contact mating Incorrect Insertion Prevention Safety plug release Interface Connector - Hirose LX Ultra low-profile connector

Product Detail

New items

5352152-1, TE Connectivity

Z-PACK™Series Connector for Compact PCI System Offering high density, high performance and reliability Hot-swap capability, benefiting real-time applications Utilising press fit technology and Euro-style packaging Compact PCI can use 32bit or 64bits on 3U cards (connectors P1-5/J1-5) and 6U cards (connectors P1-5/J1-5), using standard and special lengths The Z-PACK 2 mm HM Interconnection System is designed as a two part system for the connection of free boards (Daughterboards or PCBs) to fixed boards (Motherboards, Backplane or Backpanel) and feed the connection through the fixed board.

Product Detail

New items

1410187-3, TE Connectivity

TE Connectivity VITA 46 VPX Compliant MULTIGIG RT Backplane Connectors VITA 46 VPX Compliant MULTIGIG RT backplane connector system with a high-speed data rate capable of meeting or exceeding 10 Gbit/s. VPX provides higher speed data rates than VME and increases bandwidth with fewer pin counts. The MULTIGIG RT VITA 46 high-speed backplane system consists of backplane receptacle connectors and daughtercard plug connectors. These MULTIGIG RT VITA 46 high-speed backplane connectors have a modular design with optimized footprints for improved signal integrity. Staggered differential pairs minimize footprint noise. The modular design of these VITA 46 backplane connectors enables them to be used in various combinations offering flexibility in design. Flexible wafer layout options also enable customization. These MULTIGIG RT VITA 46 backplane connectors feature a robust pinless interface for increased reliability and durability, superior crosstalk performance and provide ESD protection in the unmated state. The connectors feature polarization to prevent mismating and have compliant PCB pins for manufacturing efficiency and superior electrical performance Part number 1410187-3 is a Daughtercard Connector - Centre Module, Differential Part number 1410190-3 is a Daughtercard Connector - Centre Module, Single Ended Part number 1410189-3 is a Daughtercard Connector - Left End Half Module, Utility Part number 1410140-1 is a Backplane Connector - Centre Module Part number 1410142-1 is a Backplane Connector - Right End Module Part number 1410186-1 is a Backplane Connector - Right End Half Module Features and Benefits VITA 46 VPX Compliant High-Speed data rates of 10+ Gbit/s. Modular system for design flexibility Optimized footprints for improved signal integrity Pinless interface for increased reliability Superior cross talk performance Provide ESD pr...

Product Detail

New items

516-056-000-321, EDAC

EDAC 516 Rack and Panel Connector with Backshell From EDAC, this 516 series rack and panel connector comes with a protective back shell, a guide pin and connecting jack screws. The connector housing is designed to use female and male contacts, which are available separately. Available in this Range Stock No. 910-8383 is a 56 way Rack and Panel Connector Housing with a Top Entry Back Shell, Guide Pin and Jack Screws Stock No. 910-8386 is a 56 way Rack and Panel Connector Housing with a Side Entry Back Shell, Guide Pin and Jack Screws EDAC 516 Range This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility. Guaranteed secure connection Hermaphroditic metal to metal contact design Polarized mouldings and metal locators Crimp, solder or wire wrap contacts Contacts fit plug and socket Current rating 8.5A max. Contact resistance 6mΩ max. Contact material Phosphor bronze Contact plating Gold, 0.25-0.5μm over nickel Insulator material Polycarbonate Dielectric withstanding voltage 1800V r.m.s. at sea level Withdrawal force 0.56N to 4.45N per contact pair Operating temperature -65°C to +125°C

Product Detail

New items

244997 / 5646955-1 5L, ERNI

ERNI ERmet 2.0 mm Right Angled Male Power Modules From ERNI Electronics, a series of backplane power connectors. These male angled universal power modules complete the ERmet 2.0 mm range. The universal power modules feature press-fit technology. Designed to supply power to daughter cards when used with 2 mm ERmet connectors conforming to IEC 61076-4-101. The superior quality power connectors have gold plated copper alloy contacts and a robust PBT-GF30 housing. The range includes 3, 5, 6 and 7-pin options accommodating a wide variety of current rating options. See part number 917-5241 for typical connector range

Product Detail

New items

HM2P07PDG1A1N9LF, Amphenol ICC

Hard Metric 2 mm pitch Modular and Scalable by 25 mm to 50mm Three levels of mating contact lengths and different terminal lengths. Multipurpose center, Coding feature, Guiding feature and location peg SI performance Mating compatibility with Millipacs® high speed (HS) Right Angle Receptacle Different length contacts at any position Hybrid connectors with signal, power and coaxial contacts Two outer rows Popular equipment practice standard. Millipacs® co-exists with all HM compatible connectors and accessories Adequate spacing for routing PCB traces and thereby optimizing board layers, Reduces PCB real estate Vs 2.54mm Standard Modular length, without any loss of position Suitable for various applications with different PCB thickness, Rear plug up applications, hot swapping Easy guiding and visual identification. Prevents wrong mating Suitable pinning assignment for data rate up to 3Gbps. Enables data rate suitability up to 10Gbps - cost-effective transition to higher speed retaining the current backplane architecture and connectors Custom loading Enables versatile circuit design Millipacs®, Back Plane Connectors, 2 mm Hard Metric Series 5 Row vertical Press-Fit Header, Type A with 110 Signal Pins

Product Detail

New items

516-020-000-302, EDAC

Rack and Panel Plug Connector Housing From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding receptacle. Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately. EDAC 516 Range This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility. Guaranteed secure connection Hermaphroditic metal to metal contact design Polarized mouldings and metal locators Crimp, solder or wire wrap contacts Contacts fit plug and socket Current rating 8.5A max. Contact resistance 6mΩ max. Contact material Phosphor bronze Contact plating Gold, 0.25-0.5μm over nickel Insulator material Polycarbonate Dielectric withstanding voltage 1800V r.m.s. at sea level Withdrawal force 0.56N to 4.45N per contact pair Operating temperature -65°C to +125°C

Product Detail

New items

5223008-1, TE Connectivity

Z-PACK™ 2mm FB (Futurebus+) Connectors High density, high speed signal and power connectors Modular design, end to end stackable Complies with Futurebus+ and IEC 1076-4-0X-(48B) The Z-PACK 2 mm HM Interconnection System is designed as a two part system for the connection of free boards (Daughterboards or PCBs) to fixed boards (Motherboards, Backplane or Backpanel) and feed the connection through the fixed board.

Product Detail

New items

5100147-1, TE Connectivity

TE Connectivity Z-PACK™ HM Type A Backplane Connectors Z-PACK™ HM 2mm Type A backplane right angle and vertical mounting header and receptacle connectors for a 2mm HM interface available as free or fixed board PCB mounting with ground return shielding options, ACTION PIN post contact options and various CompactPCI designation configurations, please refer to additonal data table for details. These Z-PACK™ Hard Metric Type A backplane connectors have UL 94V-0 polyester housings with multi-purpose centre mating alignment and have standard crosstalk with the exception of stock number 739-0981 which offers reduced crosstalk. Additional Data Stock Number Manufacturer Part Numbe r Description No of Rows Contact Configuration CompactPCI Designation Mounting Style Rows Loaded Shielding Type 739-0981 5100623-1 Type A 110 Way Right Angle Receptacle 5 ACTION PIN Post, Signal No Free Board, AMP Standard Option 1 C, D, E, A, B Ground Return Shielding, Upper 782-5159 352332-1 Type A 154 Way Vertical Header 5 + 2 Signal P1 Hot Swap Free Board, Front Mating Level 1 Z, F, D, C, B, A, E Ground Return Shielding 864-3295 106015-1 Type A 110 Way Right Angle Header 5 ACTION PIN Post, Signal No Free Board, Front Mating Level 1 - None 864-3377 1857994-1 Type A 110 Way Right Angle Receptacle 5 Compliant Pin, Signal J1, J4 Free Board A, B, C, D, E Ground Return Shielding, Upper 864-3573 6345055-1 Type A 110 Way Right Angle Header 5 Signal No Fixed Board, Front Mating Level 2 - None 864-3826 100668-1 Type A 154 Way Vertical Header 5 + 2 ACTION PIN Post, Signal No Fixed Board, Front Mating Level 1 E, Z, F, D, C, B, A Ground Return Shielding 864-3882 5100668-1 Type A 154 Way Vertical Header 5 + 2 ACTION PIN Post, Signal No Fixed Board, Front Mating Level 1 D, C, B, A, Z, E, F Ground Return Shielding 718-9147 100143-1 Type A 110 Way Vertical Header 5 ACTIO...

Product Detail

New items

516-090-000-202, EDAC

Rack and Panel Receptacle Connector Housing From EDAC, the cable mounting rack and panel connector housing incorporates an actuating screw to facilitate connection with a corresponding connector. Crimp, solder and wire wrap contacts are available for this connector housing, and are sold separately. Dimensions (mm) No. of ways A B C D E F G Dia. 20 pin 24.38 28.6 32.26 6.60 10.41 16.26 2.64 38 pin 36.07 42.87 49.73 6.60 11.89 20.73 3.45 56 pin 49.28 57.91 64.77 6.60 11.89 20.73 3.45 90 pin 52.07 57.96 67.95 7.62 19.43 27.1 3.45 EDAC 516 Range This extensive range of 8.5A multipole connectors is suitable for use in a wide range of applications where safety and/or ultra-reliability is required. These include audio broadcast, railway signalling, oil and gas industry control systems together with general industrial and automotive control & test systems. These connectors are suitable wherever a multi-pin cable to panel or cable to cable connection is required. The plugs or receptacles of this high density system can form either the fixed or free half of the connector, providing designers with great flexibility. Guaranteed secure connection Hermaphroditic metal to metal contact design Polarized mouldings and metal locators Crimp, solder or wire wrap contacts Contacts fit plug and socket Current rating 8.5A max. Contact resistance 6mΩ max. Contact material Phosphor bronze Contact plating Gold, 0.25-0.5μm over nickel Insulator material Polycarbonate Dielectric withstanding voltage 1800V r.m.s. at sea level Withdrawal force 0.56N to 4.45N per contact pair Operating temperature -65°C to +125°C

Product Detail

What are backplane contacts used for?

Types of backplane contacts

What is backplane speed?

New Items

HM2R30PA5100N9LF, Amphenol FCI

516-056-000-401, EDAC

LX40-20P, Hirose

5352152-1, TE Connectivity

1410187-3, TE Connectivity

516-056-000-321, EDAC

244997 / 5646955-1 5L, ERNI

HM2P07PDG1A1N9LF, Amphenol ICC

516-020-000-302, EDAC

5223008-1, TE Connectivity

5100147-1, TE Connectivity

516-090-000-202, EDAC

FAQs